There is no significant difference in wearing sensation within a deviation of ± 3mm.

Considering the issue of friction between the front steel toe of safety shoes, it is recommended to choose the larger size when both sizes are available.

The length of the last refers to the length of the internal space of the shoe. The human foot needs a certain amount of movement space inside the shoe, and the internal length of safety shoes is generally 15+5mm longer than the actual foot length. The insole needs to be fixed inside the shoe, so it will be 2mm longer than the last length.

Other issues to pay attention to when trying on sizes:

1) Stand on a sturdy ground and do walking and squatting exercises, without sitting or standing still to try on the size.

2) When measuring foot length, if the size of the left and right feet is different, the corresponding size should be selected according to the length of the big foot. Do not determine size based on whether one foot is suitable.

3) Try on as much as possible at the end of the day when the length of the feet is relatively large. This can avoid the problem of steel head grinding caused by foot expansion during work.

Foot feel during actual fitting

1) The toe does not pinch the foot, and there is no friction sensation from the steel toe

2) No sense of pressure on the instep

3) One finger can be inserted into the heel without obvious friction and without dropping the foot

• 
  Machining

  Brief introduction to related application areas

• 
  Petrochemical

  Brief introduction to related application areas